
Vendor:Platinum Racing Products
PRP Pro Series Ignition Timing Kit - Nissan RB30 SOHC
Fits the following engines:
- RB30 Single Cam
This is PRP's Big hitter, consisting of our full 'Pro Series' 36-2 cam & crank sensor kit which utilizes a MoTeC reluctor / sensor with our all-new MoTeC cam hall effect sensor, a completely sealed sensor with external plug system!
This high end pro series kit is specifically designed to be the ULTIMATE in cam and crank sensor systems as it has flawless resolution and up to 3 times more data than our current 12 tooth system, this kit is designed for applications up to a whopping 3000whp!
When designing this kit, we set out to create a non-balancer-based crank wheel as balancer casings just wander too much for our liking. We had to compromise, as it also needed to work with a rather large sensor being the ultimate sensor of choice for our intended application, hence the 'swept-back' position sensor mount design.
The RB30 SOHC 'Pro Series Ignition Timing Kit' comes with the following:
UPPER Camshaft Sensor kit:
- CAS bracket.
- Top sensor bracket.
- Cam sensor plate.
- Nylon braid and dual wall heat shrink.
- MoTeC reluctor style sensor (with MoTeC support).
- Custom made silicone injection moulded 90 degree boot.
- Bolts and hardware Deutsche connector plugs sets, heat shrink, braid.
- Lifetime warranty on PRP Billet hardware, 1 year on electronics.
LOWER Crankshaft Sensor kit:
- Teflon shielded twin core wire.
- CNC 5 axis machined Bottom sensor mount.
- MoTeC reluctor style sensor (with MoTeC support).
- 1 piece 36-2 crank wheel and bottom crank gear assembly.
- Custom made silicone injection moulded 90 degree boot.
- Bolts and hardware Deutsche connector plugs sets, heat shrink, braid.
- Lifetime warranty on PRP Billet hardware, 1 year on electronics.
CRITICAL INFORMATION:
- With the introduction of new sequential smart coils, you may need a dizzy block off, CLICK HERE to get your dizzy block off plate.
- This kit comes BY DEFAULT to suit Small bore mounts from the following mechanical fuel pumps: Kinsler / Weldon / Waterman.
- If you require this kit to be made to suit Large bore mounts for the following mechanical fuel pumps: Enderlie / Aeromotive / Magnus, then please LEAVE A NOTE in the CART AREA when checking out and we will accommodate your request at NO CHARGE.
PLEASE SPECIFY YOUR CUSTOM COLOUR IN THE CART AREA "SPECIAL NOTES" SECTION, CUSTOM COLOURS INCLUDE:
- Gold
- Bronze
- Grey
- Teal
- Orange
- Green
- Cardo Zinc
*CRANK SENSOR BRACKET HOLDERS COME IN BLACK ONLY!*
Pairs well with

PRP Pro Series Ignition Timing Kit - Nissan RB30 SOHC
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FULL BOOST NO BORDER
FAQs
Please read our FAQs page to find out more.
Q: Do you ship to Quebec?
A: No — and we never will.
This decision is final and intentional.
Quebec’s tax structure and regulatory requirements create unnecessary friction for independent businesses like ours.
More importantly, the region has consistently demonstrated a lack of respect for authentic Japanese car culture, which is the foundation of everything we stand for.
The prevalence of replica parts, low-effort builds, and price-driven behavior directly contradicts our values of craftsmanship, originality, and pride.
We are not here to accommodate markets that dilute the culture.
We are not interested in adjusting our standards to fit in.
We do not respect all builds.
We respect those built with intent, effort, and pride — not for attention.
Trimotive is a brand for enthusiast, not clout chasers.
Quebec is not our market, and never will be.
Q: I’m building something custom — can Trimotive help?
A: Hell yes — that’s what we live for.
While our product line focuses on proven, platform-specific parts, we’re always excited to support builders pushing boundaries. Whether you're working on a custom swap, cross-platform setup, or a full-on Frankenstein project — we’re here for it.
We’re constantly expanding our knowledge base, and community-driven R&D is part of how we grow. If you’re doing something different, ambitious, or just plain wild — reach out. We’re always down to get involved, offer insight, and help source what you need.
If it’s built with intention, we want to be part of it.
Let’s bring that vision to life.
Q: Why doesn’t Trimotive accept returns and refunds?
A: Because we take our parts — and our partners — seriously.
Trimotive works closely with a network of specialized suppliers across North America, Japan, and beyond. Many of the products we offer are platform-specific, custom-built, or limited-production, and in many cases, made-to-order. These parts are not meant to be casually returned or resold.
Some of our suppliers are small, independent manufacturers — including one-man operations in Japan — who pour their time, skill, and pride into every product they ship. Others are high-volume performance brands with strict allocation policies. In both cases, mistakes or indecision on the buyer’s part don’t just affect us — they damage our relationships and affect everyone’s timelines.
We’re proud to work with companies that embody precision, accountability, and craftsmanship — values especially ingrained in Japanese business culture, and values that we fully adopt at Trimotive.
For this reason, we enforce a no-return policy on all non-defective items. We do not do this to be inflexible, but to protect the integrity or our supply chain and prioritize builders who plan, commit, and execute with intention.
We’re not here to accommodate indecision.
We’re here to support serious builds — and the people behind them
Q: Can I pre-order parts?
A: Yes — if you’re fully committed, we’ll make it happen.
Many of the parts we source come from small-scale manufacturers or boutique suppliers, especially in Japan, where lead times can vary significantly. Some items are made-to-order, produced in small batches, or even hand-built by single craftsmen. That’s part of the culture — and part of what makes them worth waiting for.
If you’re locked in and ready to go, we will coordinate directly with the manufacturer to confirm availability and timelines before we take your payment.
All pre-orders are paid in full and non-refundable, unless the estimated lead time becomes unreasonable or changes drastically. In those rare cases, we will issue a full refund and notify you immediately.
Pre-orders are for committed builders.
If that’s you — we’ll get you what you need.
Q: Does Trimotive offer sponsorships?
A: Yes — but only to builders who fully align with our values.
Trimotive sponsorships are reserved for individuals or teams who have a clear, standout presence in one or more of the following areas: drifting, time attack, drag racing, or functional show builds. We’re not interested in social media clout — we’re interested in execution, discipline, and authenticity.
We only consider cars that:
Are built with purpose, not just for photos
Use proven, high-quality parts only (no replicas, no shortcuts)
Represent a genuine commitment to the culture, not just the spotlight
If your project stands out and reflects the level of devotion we expect, reach out with a full build sheet, current photos, and a clear statement of your goals. If we see alignment — we’ll talk.
