
Vendor:Platinum Racing Products
PRP ETS Pro PLUS Attesa Torque Split Controller - Nissan Skyline
ETS Pro PLUS Nissan Skyline GTR Center Differential ATTESA Torque Split Controller for R32 R33 R34
Pro Plus is now available. Simply wire in your wheel speed sensors!
ETS-Pro Plus is engineered specifically for use with the R32, R33 and R34 Skyline GT-R ATTESA system. Designed to give you complete control over Nissan’s multiplate transfer case, ETS-Pro easily adjusts active torque split percentages on the fly – allowing you to switch from 4WD to RWD and all points in between. It also allows proper control for using an AWD Skyline GT-R transmission in non-OEM race applications or swaps (such as Escort Cosworth).
The PRP ETS-PRO PLUS is sold with a PRP manufactured 6061 billet case and anodized purple.
All instructions are located on our guides page Here! Otherwise links below
ETS-Pro Installation notes: Click Here!
ETS-Pro GTR Consumer Made Installation Guide: Click Here!
ETS-Pro Plus Universal Install Guide: Click Here!
ETS-Pro Plus Wiring Diagram Click Here!
ETS-Pro Troubleshooting Click Here!
Technical Details:
-Advanced Microprocessor with Dual-axis high-resolution G-Sensor
-Water resistant and dust proof enclosure (IP65)
-Custom firmware with driver adaptive capability
-Torque split calculations use advanced formulas instead of static mapping or lookup tables
-Several internal modes (programs) based on driver throttle and G-Sensor behaviour that switch on the fly automatically
-Wheel speed inputs on 2nd microprocessor daughter-board for aggressive Drag launches. ABS sensors are not polarity specific
-ETS-PRO unit requires connecting wires. The installer has the option to hard wire the ETS-PRO to the ATTESA Solenoid (located on ATTESA pump) or to connect the ETS-PRO to the OEM wiring harness.
-For +wheel speed installation, 1 front and 1 rear ABS sensor should be hardwired.
Features:
-ETS-Pro can be in MANUAL mode which controls pressure directly off the knob setting OR AUTO mode which uses the TPS and g-sensor inputs, working off the algorithm and the knob for “gain”. The Auto mode is able to respond immediately with very little lag and precise pressure control.
Warranty and Repairs
All ETS Pro Plus units undergo individual testing before being boxed and shipped. In the event of a warranty claim, the unit must be sent to our electronics experts in Canada for assessment. The customer is responsible for all shipping and associated costs, which will be fully refunded if the unit is deemed faulty under warranty.
If the unit is found to be in perfect working condition or has been damaged due to incorrect installation, inspection and or repair, and return shipping fees will apply.
As this process is beyond PRP’s control, we strongly recommend installation by a qualified auto electrician or equivalent professional. If you have an issue, Contact Us.
Please note: ETS Pro Plus is excluded from our lifetime warranty period. Any claims need to be made within 60 days of receiving the product.
Pairs well with

PRP ETS Pro PLUS Attesa Torque Split Controller - Nissan Skyline
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
FULL BOOST NO BORDER
FAQs
Please read our FAQs page to find out more.
Q: Do you ship to Quebec?
A: No — and we never will.
This decision is final and intentional.
Quebec’s tax structure and regulatory requirements create unnecessary friction for independent businesses like ours.
More importantly, the region has consistently demonstrated a lack of respect for authentic Japanese car culture, which is the foundation of everything we stand for.
The prevalence of replica parts, low-effort builds, and price-driven behavior directly contradicts our values of craftsmanship, originality, and pride.
We are not here to accommodate markets that dilute the culture.
We are not interested in adjusting our standards to fit in.
We do not respect all builds.
We respect those built with intent, effort, and pride — not for attention.
Trimotive is a brand for enthusiast, not clout chasers.
Quebec is not our market, and never will be.
Q: I’m building something custom — can Trimotive help?
A: Hell yes — that’s what we live for.
While our product line focuses on proven, platform-specific parts, we’re always excited to support builders pushing boundaries. Whether you're working on a custom swap, cross-platform setup, or a full-on Frankenstein project — we’re here for it.
We’re constantly expanding our knowledge base, and community-driven R&D is part of how we grow. If you’re doing something different, ambitious, or just plain wild — reach out. We’re always down to get involved, offer insight, and help source what you need.
If it’s built with intention, we want to be part of it.
Let’s bring that vision to life.
Q: Why doesn’t Trimotive accept returns and refunds?
A: Because we take our parts — and our partners — seriously.
Trimotive works closely with a network of specialized suppliers across North America, Japan, and beyond. Many of the products we offer are platform-specific, custom-built, or limited-production, and in many cases, made-to-order. These parts are not meant to be casually returned or resold.
Some of our suppliers are small, independent manufacturers — including one-man operations in Japan — who pour their time, skill, and pride into every product they ship. Others are high-volume performance brands with strict allocation policies. In both cases, mistakes or indecision on the buyer’s part don’t just affect us — they damage our relationships and affect everyone’s timelines.
We’re proud to work with companies that embody precision, accountability, and craftsmanship — values especially ingrained in Japanese business culture, and values that we fully adopt at Trimotive.
For this reason, we enforce a no-return policy on all non-defective items. We do not do this to be inflexible, but to protect the integrity or our supply chain and prioritize builders who plan, commit, and execute with intention.
We’re not here to accommodate indecision.
We’re here to support serious builds — and the people behind them
Q: Can I pre-order parts?
A: Yes — if you’re fully committed, we’ll make it happen.
Many of the parts we source come from small-scale manufacturers or boutique suppliers, especially in Japan, where lead times can vary significantly. Some items are made-to-order, produced in small batches, or even hand-built by single craftsmen. That’s part of the culture — and part of what makes them worth waiting for.
If you’re locked in and ready to go, we will coordinate directly with the manufacturer to confirm availability and timelines before we take your payment.
All pre-orders are paid in full and non-refundable, unless the estimated lead time becomes unreasonable or changes drastically. In those rare cases, we will issue a full refund and notify you immediately.
Pre-orders are for committed builders.
If that’s you — we’ll get you what you need.
Q: Does Trimotive offer sponsorships?
A: Yes — but only to builders who fully align with our values.
Trimotive sponsorships are reserved for individuals or teams who have a clear, standout presence in one or more of the following areas: drifting, time attack, drag racing, or functional show builds. We’re not interested in social media clout — we’re interested in execution, discipline, and authenticity.
We only consider cars that:
Are built with purpose, not just for photos
Use proven, high-quality parts only (no replicas, no shortcuts)
Represent a genuine commitment to the culture, not just the spotlight
If your project stands out and reflects the level of devotion we expect, reach out with a full build sheet, current photos, and a clear statement of your goals. If we see alignment — we’ll talk.
